Remove undeletable partitions from Windows 10 drives

Five partitions before we start

Need to remove stubborn un-deletable partitions from Windows 10 or previous? Here is what those partition layouts might look like: Here is how to remove those same partitions First open a command prompt and then proceed as follows: C:\Windows\system32>diskpart […] On computer: XWING10 DISKPART> SELECT DISK 8 Disk 8 is now the selected disk. *NOTE: make sure you select the correct disk! DISKPART> LIST PARTITION Partition ### Type Size Offset ————- —————- ——- ——- Partition 1 System 300 MB 1024 KB

List of TrueImage files

8710w_xp_2008_10_30.tib 2013_02_17_EA_full_b1_s1_v1.tib r51_ssd_xpsp3(with_password).tib m2010_2009_09_02.tib M6700_2013_09_10 factory fresh_full_b1_s1_v1.tib r51_40GB (may have some bad sectors -JD).tib 2010_08_09_XPb4Win7.tib ea-660s-dell-win7-alldrivers-noprograms.tib NUC_2013_01_24-Win7x64-01_full_b1_s1_v1.tib 8710w 2008_12_07 Win XP 32 bit, all drivers, no programs.tib vostro1400xp32.tib M6500-factory-500GB.tib e5530-before-1st-boot_full_b1_s1_v1.tib PC_2013_02_17_b4-Dell-660s-transfer.tib tyan5380_03.tib DellVostro1400Angela.tib NUC_2013_09_04_Win7x64-2_full_b1_s1_v1.tib 2011_07_03_M6500_w7-x64-RAID.tib Acer4350_ComputerX_Win71.tib Acer7736_2014_08_13 laptop_full_b1_s1_v1.tib 2012_01_11_MainHoss true image for cloning HossJr.tib tyan5380.tib Phenom-II_cleanWin7_80GBIntelSSD.tib m4400.tib 2014_09_24-YOGA13_2_full_b1_s1_v1.tib Acer7736_2014_08_13 laptop_full_b1_s1_v1.vhd Dell_E6430_2012_12_19-Factory-Never-Booted.tib x300-6gb-dell-xp32.tib everun-from-ebay.tib x300-active.tib msi-1722_2009_11_06clean.tib tyan5380_02.tib E6430-JD-Fresh-Win7x64-Install.tib toshiba-satellite_2010.tib Acer4350_ComputerX_Win72.tib kiera-sp3-no-video-drivers.tib X220_2012_01_01_256GBSSD.tib M6700_2013_10_18 clean Win 7 x64_full_b1_s1_v1.tib v131-red-factory.tib kohjinshaXPverB.tib vgn-z540_01.tib M4400 Win7 X64 2010_08_11.tib sony_2009_12_20_Q.tib m4400_2009_10_21-clean.tib dell-m4400-factory.tib little_valley_before2_5.tib m6500-factory-500gb1.tib Vostro200gb_2008_10_16.tib NUC_2013_09_04_Win7x64-drivers-updates_full_b1_s1_v1.tib

Remove pre-installed Windows 10 apps

While I have kept most of my office systems on Windows 7, I do still have a few Windows 10 devices around. One of the most annoying things about Win10 (other than MS’s policies about user data collection etc.) is the number of apps that are pre-installed after a fresh install Thankfully, there are ways to remove most Windows 10 built in apps: [Guide] How to Remove All Built-in Apps in Windows 10 – AskVGhttp://www.askvg.com/guide-how-to-remove-all-built-in-apps-in-windows-10/UPDATE: Tutorial updated to include instructions for removing

Exede real world download speeds

2.7 MB/s download = 21.6 Mbps

Real world Exede download speeds: Downloaded 8/20/2016 @ 10:58AM *Bandwidth speed conversion details here. We live off the grid (no power lines, no phone lines) and this download speed this compares favorably with DSL in the nearest town (16 miles). Town DSL in the area is generally around 1.2 MB/s or 9.6 Mbps. However, please be aware there are significant drawbacks inherent to satellite internet (latency/lag, affected by weather, relatively high costs, limited monthly bandwidth).

Reviewer plugin: php version may not be greater than 10 character

Manually specifying PHP version

While trying to activate the “Reviewer” plugin by evoG, I encountered the following error: Thankfully, after a little looking around I found where the PHP version is passed to the activation routine. By manually specifying a short PHP version (< 10 char) I was finally able to active the plugin Here are the relevant sections to edit: /wp-content/plugins/reviewer/admin/includes/class-license-page.php NOTE: I recommend backing up your file before editing. If you encounter an error like this, I hope these tips will prove

Eero wishlist

Eero makes a rather splendid WiFi device, however, there is certainly room for improvement! As such, here is my wishlist for future Eero enhancements or revisions: Dual WAN failover option load balancing option PoE support Per device bandwidth usage statistics QR code or barcode scanning for setup (when bluetooth fails, manually entering a device ID is a pain) Despite the simplistic feature-set of the Eero, I do still like it. Here’s hoping they choose to enable some additional functionality for their faithful

NanoStation Loco M900 default IP address (192.168.1.20)

UniFi M900

Recently I setup a point-to-point (Layer 2, transparent bridge) using two Ubiquiti NanoStation Loco M900 wireless (900MHz) devices. For reference purposes, here is the default IP address as well as the default username/password: Ubiquiti NanoStation Loco Default Login Info: Default IP address: 192.168.1.20 Default username: ubnt Default password: ubnt Overall, the performance and link quality has been excellent. Range and resistance to interference has also been superior to most 2.4GHz/5GHz implementations. If you have experience with NanoStations, feel free to leave a comment!

Page 1 of 13312345...102030...Last »